Morjava HD-E20 MiLi Smart Skin Moisture Detector with Swarovski Crystal design Skin Care Digital Analyzer works on face eyes neck hands APP Bluetooth Switch
I Turn on the Bluetooth switch and connect with the Mi Li Pure App
Press the button at the bottom of the product When the indicator flashes,
then the product’s Bluetooth connection is successful and displayed on your phone
Touch the metal probe to an area of skin, click on the site test on your phone’s display.
When the indicator lights turn on, testing is underway
l 5 seconds later the test results * are shown in your phone’s App
Moisture Rate Results (Average)
Note: There’s about a 3% variance with average values in the summer; 5% in the winter.
Operating Systems and Devices
Available on the
GET IT ON
^ Google play
For iOS 7 and above for iPod Touch, iPhone or iPad. Bluetooth 4.0. For Android 4.3 and above
(Support for Android 43 or below after upgrading). Bluetooth 4.0.
Read the manual carefully prior to use. Neither MiLi nor Hali-Power Industrial Co., Ltd.
shall be responsible for any loss or damage resulting from misuse.
1.Test the product before use. Wipe clean the area to be tested to prevent cosmetics, oil,
sweat and other impurities that may affect test results.
2.The product is designed to be accurate within a specific range, but in actual use it is still
possible for environmental factors to affect the test results. For proper testing, press the metal
probe against the skin with enough force to activate the product.
3.Please keep the probe pressed against the skin for at least 5 seconds. Make sure the probe is stable
and pressed against the skin for optimal detection accuracy.
4.Please keep the metal probe dry and clean.
5.Do not use if you have any allergies to metal surfaces.
6.Do not use on or around open or irritated skin such as cuts, scabs or inflammation.
- 1. 5 seconds later the test results * are shown in your phone’s App.Battery: Coin Cell. can be used more than 2 years. Battery can not replace or charge.However it comes with 12 month free replacement if battery is running out .
- 2.Press the button at the bottom of the product When the indicator flashes, then the product’s Bluetooth connection is successful and displayed on your phone
- 3. Turn on the Bluetooth switch and connect with the Mi Li Pure App.
- 4..Go to the Apple Store or Google Play; search for’MiLi Pure’.
- 5.Note: There’s about a 3% variance with average values in the summer; 5% in the winter.